RSS Feed
Knowledgebase : Radio/LMR Gateway
The attached document describes how to update your TCB-IP2.
The attached document describes how to configure a TCB-IP2 for RTP streaming.
The ESChat RTP Gateway supports the following specifications: * RTP over UDP * G.711 u-law codec @64kbps * Receipt of 20ms frames at any bundling ratio per UDP packet * Transmit of 20ms frames at any bundling ratio per UDP packet
Before installing a Radio/LMR to ESChat gateway the planned deployment site should meet the following requirements: * The site must be connected to the internet * A static, public IP address must be routable to the Radio/LMR gateway. * The Radi...
When requesting a VPN Gateway connection to the ESChat Cloud Services the Customer must provide the following information in the request: ITEM HOW USED COMMENTS The type of customer gateway (for example, Cisco ASA, Juniper J-Series, Juniper SSG, ...
Note: The Default IP address for the Raven Gateway is: 10.1.1.253/24 1 - CHANGE IP ADDRESS OF GATEWAY USING ONE OF THE TWO METHODS BELOW. _METHOD 1:_ * Using M4x Settings Software on provided DVD * Connect M4x to Computer via USB Cable * Open M...
RTP Gateway settings can be managed for the Admin Portal. To view or change your RTP Gateway ports or IP address: 1.) View the RTP Gateway user and select "Edit RTP Gateway" 2.) From the department level , select "RTP Gateway" then click on the gate...
NAT vs PAT When using an RTP client it is important to ensure the correct IP and port are broadcast in order to maintain communication with the ESChat server. Since the ESChat server is listening on a specific IP and Port combination, Network Address Tr...
ESChat offers the option of LMR/RoiP integration via a RoiP Gateway connected to a donor radio (custom cabling may be required). For each channel of LMR to be integrated the following information is required: Customer Provides: * External Static I...